# Makefile.in generated by automake 1.8.5 from Makefile.am.
# doc/html/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#  FLAC - Free Lossless Audio Codec
#  Copyright (C) 2001,2002,2003,2004,2005  Josh Coalson
#
#  This file is part the FLAC project.  FLAC is comprised of several
#  components distributed under difference licenses.  The codec libraries
#  are distributed under Xiph.Org's BSD-like license (see the file
#  COPYING.Xiph in this distribution).  All other programs, libraries, and
#  plugins are distributed under the GPL (see COPYING.GPL).  The documentation
#  is distributed under the Gnu FDL (see COPYING.FDL).  Each file in the
#  FLAC distribution contains at the top the terms under which it may be
#  distributed.
#
#  Since this particular file is relevant to all components of FLAC,
#  it may be distributed under the Xiph.Org license, which is the least
#  restrictive of those mentioned above.  See the file COPYING.Xiph in this
#  distribution.

srcdir = .
top_srcdir = ../..

pkgdatadir = $(datadir)/flac
pkglibdir = $(libdir)/flac
pkgincludedir = $(includedir)/flac
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = powerpc-unknown-linux-gnu
subdir = doc/html
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(mkdir_p)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
am__installdirs = "$(DESTDIR)$(docdir)"
docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(doc_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/shaolin/rpm/BUILD/flac-1.1.2/missing --run aclocal-1.8
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /home/shaolin/rpm/BUILD/flac-1.1.2/missing --run tar
AR = ar
AS = as
AUTOCONF = ${SHELL} /home/shaolin/rpm/BUILD/flac-1.1.2/missing --run autoconf
AUTOHEADER = ${SHELL} /home/shaolin/rpm/BUILD/flac-1.1.2/missing --run autoheader
AUTOMAKE = ${SHELL} /home/shaolin/rpm/BUILD/flac-1.1.2/missing --run automake-1.8
AWK = gawk
BMP_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0  
BMP_INPUT_PLUGIN_DIR = /usr/lib/bmp/Input
BMP_LIBS = -lbeep -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0  
CC = gcc
CCAS = gcc
CCASFLAGS = -O2 -fsigned-char
CCDEPMODE = depmode=gcc3
CFLAGS = -I$(top_builddir) -I$(srcdir)/include -I$(top_srcdir)/include -O2 -DNDEBUG -O3 -fomit-frame-pointer -funroll-loops -finline-functions -Wall -W -Winline -DFLaC__INLINE=__inline__ -O2 -fsigned-char
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -I$(top_builddir) -I$(srcdir)/include -I$(top_srcdir)/include -O2 -DNDEBUG -O3 -fomit-frame-pointer -funroll-loops -finline-functions -Wall -W -Winline -DFLaC__INLINE=__inline__ -O2 -fsigned-char
CYGPATH_W = echo
DEBUG_FALSE = 
DEBUG_TRUE = #
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DOCBOOK_TO_MAN = docbook2man
DOXYGEN = doxygen
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
F77 = 
FFLAGS = -O2 -fsigned-char
FLaC__CPU_IA32_FALSE = 
FLaC__CPU_IA32_TRUE = #
FLaC__CPU_PPC_FALSE = #
FLaC__CPU_PPC_TRUE = 
FLaC__CPU_SPARC_FALSE = 
FLaC__CPU_SPARC_TRUE = #
FLaC__EXHAUSTIVE_TESTS_FALSE = 
FLaC__EXHAUSTIVE_TESTS_TRUE = #
FLaC__HAS_AS_FALSE = #
FLaC__HAS_AS_TRUE = 
FLaC__HAS_AS__TEMPORARILY_DISABLED_FALSE = 
FLaC__HAS_AS__TEMPORARILY_DISABLED_TRUE = #
FLaC__HAS_BMP_FALSE = #
FLaC__HAS_BMP_TRUE = 
FLaC__HAS_DOCBOOK_TO_MAN_FALSE = #
FLaC__HAS_DOCBOOK_TO_MAN_TRUE = 
FLaC__HAS_DOXYGEN_FALSE = #
FLaC__HAS_DOXYGEN_TRUE = 
FLaC__HAS_GAS_FALSE = 
FLaC__HAS_GAS_TRUE = #
FLaC__HAS_GAS__TEMPORARILY_DISABLED_FALSE = 
FLaC__HAS_GAS__TEMPORARILY_DISABLED_TRUE = #
FLaC__HAS_NASM_FALSE = 
FLaC__HAS_NASM_TRUE = #
FLaC__HAS_OGG_FALSE = #
FLaC__HAS_OGG_TRUE = 
FLaC__HAS_XMMS_FALSE = #
FLaC__HAS_XMMS_TRUE = 
FLaC__INSTALL_BMP_PLUGIN_LOCALLY_FALSE = 
FLaC__INSTALL_BMP_PLUGIN_LOCALLY_TRUE = #
FLaC__INSTALL_XMMS_PLUGIN_LOCALLY_FALSE = 
FLaC__INSTALL_XMMS_PLUGIN_LOCALLY_TRUE = #
FLaC__NO_ASM_FALSE = #
FLaC__NO_ASM_TRUE = 
FLaC__SSE_OS_FALSE = 
FLaC__SSE_OS_TRUE = #
FLaC__SYS_DARWIN_FALSE = 
FLaC__SYS_DARWIN_TRUE = #
FLaC__SYS_LINUX_FALSE = 
FLaC__SYS_LINUX_TRUE = #
FLaC__USE_3DNOW_FALSE = #
FLaC__USE_3DNOW_TRUE = 
FLaC__USE_ALTIVEC_FALSE = #
FLaC__USE_ALTIVEC_TRUE = 
FLaC__VALGRIND_TESTING_FALSE = 
FLaC__VALGRIND_TESTING_TRUE = #
GAS = 
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LDFLAGS = 
LIBICONV = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBICONV = 
LTLIBOBJS = 
MAINT = #
MAINTAINER_MODE_FALSE = 
MAINTAINER_MODE_TRUE = #
MAKEINFO = ${SHELL} /home/shaolin/rpm/BUILD/flac-1.1.2/missing --run makeinfo
NASM = 
OBJEXT = o
OBJ_FORMAT = elf
OGG_CFLAGS = -I/usr/include
OGG_LIBS = -L/usr/lib -logg
PACKAGE = flac
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
RANLIB = ranlib
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
VERSION = 1.1.2
XMMS_CFLAGS = -I/usr/include/xmms -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/X11R6/include
XMMS_CONFIG = /usr/bin/xmms-config
XMMS_DATA_DIR = /usr/share/xmms
XMMS_EFFECT_PLUGIN_DIR = /usr/lib/xmms/Effect
XMMS_GENERAL_PLUGIN_DIR = /usr/lib/xmms/General
XMMS_INPUT_PLUGIN_DIR = /usr/lib/xmms/Input
XMMS_LIBS = -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm -lxmms
XMMS_OUTPUT_PLUGIN_DIR = /usr/lib/xmms/Output
XMMS_PLUGIN_DIR = /usr/lib/xmms
XMMS_VERSION = 1.2.10j_20040415
XMMS_VISUALIZATION_PLUGIN_DIR = /usr/lib/xmms/Visualization
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = 
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
bindir = /usr/bin
build = powerpc-unknown-linux-gnu
build_alias = powerpc-unknown-linux-gnu
build_cpu = powerpc
build_os = linux-gnu
build_vendor = unknown
datadir = /usr/share
exec_prefix = /usr
host = powerpc-unknown-linux-gnu
host_alias = powerpc-unknown-linux-gnu
host_cpu = powerpc
host_os = linux-gnu
host_vendor = unknown
includedir = /usr/include
infodir = /usr/share/info
install_sh = /home/shaolin/rpm/BUILD/flac-1.1.2/install-sh
libdir = /usr/lib
libexecdir = /usr/libexec
localstatedir = /var
mandir = /usr/share/man
mkdir_p = mkdir -p -- .
oldincludedir = /usr/include
prefix = /usr
program_transform_name = s,^,,
sbindir = /usr/sbin
sharedstatedir = /usr/share
sysconfdir = /etc
target_alias = ppc-vine-linux
AUTOMAKE_OPTIONS = foreign
SUBDIRS = ru images
docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)/html
doc_DATA = \
	changelog.html \
	comparison.html \
	developers.html \
	documentation.html \
	download.html \
	faq.html \
	favicon.ico \
	features.html \
	format.html \
	goals.html \
	id.html \
	index.html \
	license.html \
	links.html \
	news.html \
	ogg_mapping.html

#EXTRA_DIST = $(doc_DATA)
EXTRA_DIST = $(doc_DATA) api
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/html/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  doc/html/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || mkdir "$(distdir)/$$subdir" \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="../$(top_distdir)" \
	        distdir="../$(distdir)/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-data-local install-docDATA

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-docDATA uninstall-info-am uninstall-local

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-libtool clean-recursive ctags \
	ctags-recursive distclean distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-local install-docDATA \
	install-exec install-exec-am install-info install-info-am \
	install-man install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic maintainer-clean-local \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-docDATA \
	uninstall-info-am uninstall-local


# The install targets don't copy whole directories so we have to
# handle 'api/' specially:
install-data-local:
	$(mkinstalldirs) $(DESTDIR)$(docdir)/api
	(cd api && $(INSTALL_DATA) * $(DESTDIR)$(docdir)/api)
uninstall-local:
	rm -rf $(DESTDIR)$(docdir)/api
maintainer-clean-local:
	rm -rf api
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
