#BEGIN introduction "Ϥ" "$Id: Help.txt,v 1.13 1998/08/21 16:40:47 torsten Exp $"
ǿСXPaintؤ褦

XPaintɸŪʥڥȵǽä顼ԽġǤʣβƱԽǤޤPPMXBMTIFFʤɤޤ¿βեޥåȤ򥵥ݡȤƤޤ

XPaintεǽϡġܥåɥȥڥȥɥʬ䤵ƤꡢߤΥڥϥġܥåɥǡԽ᡼ϡڥȥɥǹԤʤޤƲɥϸ̤˥顼ѥåȤȥѥ󥻥åȤäƤޤ򤷤ΤɥŬѤޤ

XPaintϤΥǥץ쥤ưޤϡ򸽺ߤΥǥץ쥤פ˹碌¸ޤ(㤨СΥ̾ǥ顼ɤ߹顢ϥΥȤ¸ޤ)Ϸ̤Ȥƥǡ»Ȥʤޤܺ٤ϡإǡ»βǽ٤ξϤ

äȾܤΥȥԥåˤʤޤ!

#BEGIN data_loss	"ǡ»βǽ"
XPaint ԽƤ֡ǥץ쥤Υͥƥ֤ηǥ
ߤƤޤΥ顼Ϥ˽äѴƤ
ޤΤᡢŪ24ӥåȥǥץ쥤ʲΥǥץ쥤Ѥ
Ƥȡξ󤬼Ƥޤ٤Ǥޤ

ܤҤ٤ȡ8ӥåȰʲοʤǥץ쥤Ǥϡ24ӥ
(True顼)8ӥå(ѥåȷ)βϡΥǥץ쥤
ޤǸ餵ޤΤᡢ8ӥåȥǥץ쥤ǤϡɸŪʥ顼
ޥåԥ󥰤ƤפǤ12ӥåȤǥ顼ޥåԥ󥰤
ꡢ24ӥåTrue顼βϡ顼ξ򼺤ʤäƤޤޤ
15ӥåȤ16ӥåȥǥץ쥤(ϳRGBӥåȿ5-5-55-6-5Ǥ)
Ǥϡ̡8ӥåȤ24ӥåȲǤξ»̤ϤäȾʤȸ
Ǥ礦24ӥåȤ32ӥåȥǥץ쥤ξ硢16ӥåȥ졼
48ӥåTrue顼ȤäؤʼʲǤʤꡢ
פǤ

ޤ¾θտ路Ƥ(ޤƤ륳Ⱦ
䥿ॹס.) ɬޤΤդƤ

#BEGIN command	"ޥɥ饤󥪥ץ"
xpaint [-popped] [-nowarn] [-size x] [-rcFile ե] 
#NL
       [-8 | -12 | -24 | -visual ӥ奢] [<ե>...]
#NL
	-size		Ǥɸȹ⤵
#NL
	-8			8ӥåPseudo顼ӥ奢Ȥ
#NL
	-12			12ӥåPseudo顼ӥ奢Ȥ
#NL
	-24			24ӥåTrue顼ӥ奢Ȥ
#NL
	-popped		Ȼ˶ΥХư
#NL
	-nowarn		ǡ»ٹɽʤ
#NL
	-rcFile		ɸ.XPaintrc夨ƻեȤ
#NL
	-visual		ɸΥӥ奢夨ƻΥӥ奢Ȥ.
#NL                  
				TrueColor, PseudoColor, DirectColor, StaticColor,
#NL
				StaticGray, GrayScale, 10ʿӥ
#NL
				ֹ(xdpyinfo)򤷤ޤ.
#NL
	<ե>	ե̾
#NL
#BEGIN toolbox "ġܥå"
ġܥåϤXPaintХФŬʥץ
ԤʤΤ˻Ȥޤ
#PUSH
#BEGIN tool_file "ե˥塼"
ե˥塼ϡХꡢեɤ߹
ꤹΤ˻Ȥޤ

Х
#NL
	ޤäʥХ򿷵ޤ (ɸॵ:
#NL
	640x480).  ɸॵѹˤĤƤϡإޥɥ
#NL
	󥪥ץ٤ξϤ

 ...
#NL
	ꤷǿХޤ

...
#NL
	̤ե򳫤ޤ.  
#NL
	򳫤ȤǤޤ.  If none
#NL
	of the specific formats is selected, XPaint
#NL
	will attempt to perform a "Best Guess" as to
#NL
	the image format.  Unknown formats will result
#NL
	in an error message.

åץܡɤ߹...
#NL
	Open an image file into the XPaint clipboard
#NL
	for pasting.  Images that have been saved in
#NL
	a format supporting odd-shaped regions will be
#NL
	loaded as they were selected, otherwise all
#NL
	images are rectangular.  See ĥդ and
#NL
	ΰ¸... under the Edit and File menus
#NL
	of the Painting Window for more information.

λ
#NL
	ɥĤXPaintλޤ
#BEGIN tool_line "饤˥塼"
The line menu sets the value of the line width.  This value is used by all
operations that paint any type of line, including the borders of boxes,
ovals and polygons.
#BEGIN tool_font "եȥ˥塼"
This menu selects the current font to use for the text operation.  There are
a few specific fonts choices listed, but all fonts are available through
the font browser.

Note:  Changing a font while inserting will not allow backspacing over text
in a previous font.

ܺ٤ϡإե٤򻲾ȤƤ
#PUSH
#BEGIN font_browser "ե"
The font browser is designed to allow any available font to be used for
painting with the text operation.  A font is selected by choosing an item
from each of the given lists until the font is displayed in the "selection"
area.  As items are selected, all lists will adjust to reflect existing
fonts with the selected characteristics.  Clicking in the blank area
of a item list will reset that list to all available options (i.e., unselect
the current one).

If the X server supports variable sized fonts, the point size list will
contain a "0" entry, which will use the value specified in the
"Point Size" field.

#POP
#BEGIN tools "̥ġ"
The painting tool icons set the current painting operation for all canvases.

Operations are selected with mouse button one.  Pressing mouse button three
while over any of the icons will bring up a menu of options available for
that tool.  Some icons also allow double-clicking as a faster method of
bringing up style options.

See the specific paint operation for more information.
#PUSH
#BEGIN arc "߸"
The arc operation paints an arc between two selected points in the primary
color/pattern, using the current line width.  Arcs are generally a
quarter of an ellipse, but may be restricted to a circular shape by
pressing the shift key while painting.

See إ饤˥塼 under the toolbox for more information about line width.
#BEGIN box "ܥå"
The box operations paint either rectangles or squares using the current line
width. Pressing shift while moving the mouse after selecting the first point
will constrain the box to a square.

Selecting the 'center' option from the menu found by pressing button three on
the icon will define the first point as the center of the square with
the second point being on the perimeter.

Filled boxes are painted in the primary color/pattern and filled
with the secondary color/pattern for the canvas.

See "Line Menu" under the toolbox for more information about line width.
#BEGIN brush "֥饷"
The brush operation uses the current brush to paint on the canvas(es).
Painting is accomplished by holding down the mouse button and
moving the mouse in the canvas area.  Button one paints in the selected primary
color/pattern, while button two uses the secondary one.

If the 'transparent' option is selected from the menu found by pressing button
three on the icon, the selected color is blended with the color already on the
canvas. You can change the opacity of the brush using the 'Parameters..'
option. Zero percent means that the canvas is not changed at all, while 100
percent gives the same result as using a non-transparent brush.

The current brush style may be changed through the brush chooser available
on the button three menu for either the brush or erase operation icons.
#BEGIN cline "Connected Line"
The connected line operation paints a series of straight lines connected at
selected vertices.  Each new vertex is selected using the first mouse button.
The second mouse button ends this operation, without forming a new vertex.

All painting is done in the primary color/pattern using the currently defined
line width.

See "Line Menu" under the toolbox for more information about line width.
#BEGIN dotPencil "ɥåȱɮ"
The dot pencil operation paints a series of dots on the canvas, following the
cursor while the mouse button is pressed.

Button one paints in the primary color/pattern, button two the secondary
color/pattern.

See "Pencil" for painting connected lines.
#BEGIN erase "ä"
The erase operation is designed to either erase a section of the painting to
the set background color for the canvas or to revert the erased area to
the originally loaded image.  (Note:  This is not the last saved image!)

The eraser is the style of the current brush, and the brush selection
window is accessible through the menu found by clicking mouse button
three on either the erase or brush icons.

See help on the "Brush" or on "Change Background..." under the Image menu of
the Painting Window for more information.
#BEGIN fill "ɤĤ֤"
The fill operation will paint an area around a selected pixel the current
primary or secondary color/pattern (based on which mouse button used).  The
area is determined by matching adjacent pixel values until a variation is
found.  Diagonal pixels are not considered adjacent.

Selecting the 'Change' option from the menu found by pressing button three on
the icon will enter Change Mode. In this mode, all pixels in the image that
have the same color as the selected one will be changed to the primary or
secondary color.

Selecting the 'Fill Range' option causes XPaint to consider not only pixels of
the exact same color as the selected one, but also pixels within the variance
(delta) set from the color selector found under the 'Select Range...' popup
menu item.
#BEGIN tfill "ǡɤĤ֤"
The gradient fill operation will paint an area around a selected pixel with a
range of colors obtained by mixing the primary and secondary colors.
The area is determined by matching adjacent pixel values until a variation is
found.  Diagonal pixels are not considered adjacent.

The 'ɤĤ֤', 'ѹ' and 'ΰɤĤ֤' options in the popup
menu work the same as for the ordinary fill operation.

Linear, Radial, Conical or Square gradient fill can be selected by clicking
mouse button three on the Gradient Fill icon. Also, several parameters can be
adjusted using the 'Parameters' item here:


#NL
	Defines the tilting of the pattern. Valid range is
#NL
	-360 to 360 degrees.

Pad	If this value is positive, the area where one color
#NL
	blends into the other will be compressed, yielding
#NL
	a sharper transition. If negative, the transition
#NL
	will be smoother. Valid range is -49 % to 49 %.

ʿ/ľեå
#NL
	Defines the center of the pattern. Valid range is
#NL
	-100 % to 100 %.
#NL
	This parameter has no effect for the Linear pattern.

ƥå
#NL
	The maximum number of colors that will be used
#NL
	for the transition from one color to the other.
#NL
	For non-TrueColor displays, it can be useful to
#NL
	limit the number of colors used to avoid running
#NL
	out of palette entries.  Very small numbers can
#NL
	also be used to get a 'blocky' effect. Valid range
#NL
	is 1 trough 300.
#BEGIN ffill "Fractal Fill"
The fractal fill operation will paint an area around a selected pixel with a
range of colors obtained by mixing the primary and secondary colors.
The area is determined by matching adjacent pixel values until a variation is
found.  Diagonal pixels are not considered adjacent.

The 'Fill', 'Change' and 'Fill Range' options in the popup menu work the same
as for the ordinary fill operation.

Several different fractal patterns can be selected by clicking
mouse button three on the Fractal Fill icon.
#BEGIN smear "Smear"
The smear operation paints each pixel under the brush the average color
of all the pixels.
Smearing is done by holding down the mouse button and
moving the mouse in the canvas area.

The current brush style may be changed through the brush chooser available
on the button three menu.
#BEGIN line "饤"
The line operation paints a straight line in the primary color/pattern
between two selected points on the canvas, using the global line width.

See "Line Menu" under the toolbox for more information about line width.

Lines may also be restricted to increments of 45 degrees (i.e.,
horizontal, vertical, or diagonal) by holding down the shift key while
painting.
#BEGIN oval "Ovals"
The oval operations paint either circles or ovals using the current line width.
Ovals/circles are painted by selecting two points that inherently define
a box around the area for the oval.  Pressing shift while moving the mouse will
constrain the oval to a circle.

Selecting the 'center' option from the menu found by pressing button three on
the icon will define the first point as the center of the circle with the
second point being the radius.

Filled ovals and circles are painted in the primary color/pattern and filled
with the secondary color/pattern for the canvas.

See "Line Menu" under the toolbox for more information about line width.
#BEGIN pencil "Pencil"
The pencil operation paints a connected line on the canvas, following the
cursor while the mouse button is pressed.  The global line width is used
to determine the width of this line.

Button one paints in the primary color/pattern, button two the secondary
color/pattern.

See "Line Menu" under the toolbox for more information about line width.
#BEGIN dynpencil "DynPencil" 
The dynamic pencil operation paints calligraphic stroke-like curves
on the canvas, following the cursor while the mouse button is pressed.
It mimics pulling a variable-width pencil with a rubber string. The
width of the pen gets smaller the faster it moves. The pencil has a
settable mass. Depending on its mass, it follows the cursor more or
less tightly as you accelerate and turn the cursor. A heavy pencil has
large inertia.

The "mass", steady-state width and "drag" can be set with the dialog 
you get if you press button three on the icon.

Button one paints in the primary color/pattern, button two the secondary
color/pattern.
#BEGIN poly "¿ѷ"
Polygon operations paint polygons as defined by a series of straight lines
between selected vertices.  Each new vertex is selected using the first mouse
button.  Ending this operation (done through pressing the second mouse
button) does not create a new vertex and results in the last created
vertex being joined to the first.

All painting is done in the primary color/pattern using the currently defined
line width.  Filled polygons are filled in the secondary color/pattern.

See "Line Menu" under the toolbox for more information about line width.
#BEGIN ray "Ray"
The ray operation paints rays from the first selected point to all
subsequent points in the primary color/pattern.  Button two ends this
operation without selecting a new ray point.  Rays may also be restricted
to slopes based on a 45 degree increment (i.e., horizontal, vertical,
or diagonals) by pressing the shift key while painting.

The width of the rays is determined by the global value for the line
width, set via the "Line" menu.

See "Line Menu" under the toolbox for more information about line width.
#BEGIN select "ΰ"
ΰˤ3Ĥˡ: ܥå, ꤲʤ, ݥꥴ.

"ܥå" will select a rectangular or ellipse-shaped region (holding down
shift while pressing the mouse button with constrain the region to a
square or a circle, respectively).  "ꤲʤ" selects an arbitrary region.
"ݥꥴ" selects a region bounded by straight lines.

The three possible modes used by these operations are set by the options on
the button three menu for either icon:

ƤΥ顼		ϰϤ򤷤ޤ.
#NL
򥫥顼ϰϤϽ	ꤵ줿顼ϰϤϰϤ
#NL
				򤷤ޤ.
#NL
򥫥顼ϰϤΤ	ꤵ줿顼ϰϤΤߤ򤷤ޤ.
#NL
See "ΰ" for more information on choosing a range of colors
for these operations.

Operations that may be performed on selected regions include the ability
to move and resize them.  Holding shift down during resizing will constrain
the region to its original aspect ratio.  Holding shift down during moving
will constrain movement to horizontal or vertical.  

Note that moving a region will result in the original location being painted
in the current background color. See "Background Color..." under the Image
menu of the Paint Window for more information.

You can also use the cursor keys to move the region one pixel at a time (hold
down the Control key to move in larger steps).
#PUSH
#BEGIN range_select "ΰ"
This window, which pops up when you click the "顼ΰ" button
next to the palettes, is designed for selecting a range of colors for use with
the select region operations.  The color range is determined by setting a
base color and the amount of variance in each of the RGB values around
this color.  Colors are considered in this range if they match a value based
on the base color +/- the given variance.   Default base color is white.

The "Pixel Delta" button allows the user to choose another color that will
be used to calculate the variance from the base color.

More information on colors and the use of the color wheel may be found
under the إѥԽ on the ̥ɥ.
#POP
#BEGIN blob "Shape"
Shape operations allow the user to draw closed objects with a 
pencil-like operation.  When the mouse button is released, the last drawn 
point is connected to the starting point. 

Painting can either be done in the primary color/pattern with button one or
in the secondary color/pattern with button two.  Filled shapes are filled in
the other palette color/pattern.  Border width is determined by the current
setting for line width.

See إ饤˥塼 under the toolbox for more information about
line width.
#BEGIN spray "ץ졼"
The spray operation is designed to emulate a spray can.  It will paint
a random set of dots within a given radius.

It is possible to change the attributes of the spray operation to
achieve the desired effect.   There are three parameters that will
modify the configuration of the spray tool:
#NL
	radius	how large of a circle to fill
#NL
	density	number of dots in the given area
#NL
	rate		speed to fill the area in tenths of a second

Additionally, it is possible to change the distribution of the dots to
be either even or gaussian (usually only noticeable at large radii).
These options are found in the menu brought up by clicking button three
on the spray icon.

As with many other operations, the spray operation can make use of either
the primary or secondary color/pattern based on which button (one or two,
respectively) is held down while painting on the canvas.
#BEGIN text "ƥ"
The text operation allows for typing in the currently selected font.
Pressing mouse button two in the canvas area while inserting text
will paste text from the X clipboard at the current insertion point.

See the إեȥ˥塼 for information on changing the selected font.

Note:  Changing a font while inserting will not allow backspacing over text
in a previous font.
#POP
#POP
#BEGIN canvas "̥ɥ"
̥ɥˤɽƤԽ뤿ΥХ,
βù뤿Υ˥塼,  ܡ()ѥå
顼ѥåȤӤɲåܥޤǤޤ.

̤̥ɥΥġܥå򤷤Ƥ, Υ
ХꥢؤŬѤޤ. ȤϤˤĤƽҤ٤Ƥ
ƥإפ򸫤Ʋ.

#PUSH
#BEGIN fileMenu "ե˥塼"
The file menu on the painting window is for saving information associated
with the image displayed on the current paint canvas. 

XPaint runs on a variety of displays.  Saving
images will adapt them to the current display type (i.e., a color image 
loaded on a greyscale screen will be saved as a grey image).

See ز for a description of the image formats usable
by XPaint.

¸
#NL
	Save the current image with the original
#NL
	filename and format.  If this is a new
#NL
	image, perform the "Save As" operation.

̾¸
#NL
	Save the current image with the specified
#NL
	filename and format (default is TIFF).

ΰ¸...
#NL
	Save the selected region, in the original
#NL
	form that it was selected (width, height and
#NL
	rotation).  Odd-shaped regions will be saved
#NL
	as rectangles filled with the background
#NL
	color.  If the output format supports image
#NL
	masks (e.g., TIFF, PNG, XPM), then this
#NL
	information will also be saved.  See "Load
#NL
	Clipboard..." under the toolbox file menu
#NL
	for more information about odd-shaped
#NL
	images.

ѥåȤ¸...
#NL
	Save the current palette. See "Palette
#NL
	Area" for more information on how
#NL
	patterns are loaded.

ɤľ...
#NL
	Reloads the last saved image. This is
#NL
	equivalent to closing without saving
#NL
	and then opening the original file.
#NL
	You are asked for confirmation. If
#NL
	the image has not been changed since
#NL
	the last save, this operation does
#NL
	nothing.

Ĥ
#NL
	Close the current painting window, saving
#NL
	the image if desired.

#BEGIN editMenu "Խ˥塼"
The edit menu provides for a set of operations that interact with the
current selection and the paint clipboard.  The six first items in this menu
is also accessible through button three on the painting canvas.  
The clipboard is an off-screen image that is loaded either from a selected
region via these operations or from a file.

See "Load Clipboard..." on the toolbox "File Menu" for more information
about loading images from a file and "Change Background..." under the
"Image Menu" for more information on the background color.

ľ(Undo)
#NL
	Reverse the last performed operation.
#NL
	Multiple undos are possible; see 'Undo Levels..'
#NL
	in the 'Image' menu.
#NL
	If a region is selected, and you have not moved
#NL
	or resized it, the last region operation is undone.
#NL

Ƽ¹(Redo)
#NL
	Cancel the effect of the last undo.
#NL
	This must be done immediately after an undo or
#NL
	redo (before drawing anything new on the canvas).
#NL

ڤ
#NL
	Load the originally selected region into both 
#NL
	the XPaint and X server clipboards and
#NL
	change the area on the screen to the background
#NL
	color.

ԡ
#NL
	Load the originally selected region into the
#NL
	XPaint and X server clipboards.

Žդ
#NL
	Place the image in the clipboard onto the
#NL
	canvas at the last position where button one
#NL
	or two was pressed.  Images are first searched
#NL
	for in the X server clipboard and then the
#NL
	internal XPaint clipboard.

Clear
#NL
	Remove the current selection from the paint	
#NL
	canvas.

ʣ
#NL
	Perform both the copy and paste operations in one.
	

#NL
	Select the entire image on the canvas.
#NL
	(Note:  This does not use the color range options
#NL
	that the select-area operators from the toolbox do!)
#NL
	

#BEGIN regionMenu "ΰ˥塼"
This menu provides operations that can be applied to the currently
selected region.  See the "Select Regions" item under the toolbox
Painting tools for information on how to select regions.

Note:  The 'ľ' operation found under the Edit menu does not
work on these operations!

ʿȿž
#NL
	Flip the current region horizontally.

ľȿž
#NL
	Flip the current region vertically.

ž
#NL
ž...
#NL
	Both of these operations allow for rotating
#NL
	the current image by a specified number of
#NL
	degrees.  Rotation may also be done
#NL
	by pressing button two on the selection.
#NL
	Pressing the Shift button while doing this
#NL
	constrains the rotation to multiples of
#NL
	15 degrees.

Crop to region...
#NL
	Discard all portions of the image outside the region.
#NL
	This operation cannot be undone; therefore, you are
#NL
	required to confirm it.

ꥻå
#NL
	Return the current image to its original
#NL
	size and orientation.  Note:  None of the
#NL
	image processing operations will be undone.

	
#BEGIN filterMenu  "ե륿˥塼"
The filter menu provides a set of image processing operations
that can be applied to the currently selected region.  See
the "Select Regions" item under the toolbox Painting tools
for information on how to select regions.

Ǹư򷫤֤
#NL
	This applies the last filter you used again, without
#NL
	querying for any parameters.

ȿž
#NL
	Inverts the colors of the selected region
#NL
	(e.g., black to white).

㡼ײ
#NL
	Applies an image processing algorithm in an
#NL
	attempt to increase the detail on the
#NL
	selected region.

ࡼ
#NL
	Attempts to blend the colors of the region
#NL
	by averaging the pixel's color values with
#NL
	those of its neighbors.

ظࡼ
#NL
	Similar to Smooth, but avoids smearing edges
#NL
	by applying a more sophisticated algorithm.
#NL
	The effect is less pronounced than for Smooth.

Despeckle...
#NL
	Tries to remove scanning artifacts etc. by replacing 
#NL
	each pixel by the median of the pixels inside the
#NL	
	n x n mask centered around that pixel. You are
#NL	
	queried for the mask size; this must be odd and
#NL
	larger than 1.

å
#NL
	Performs an image processing edge
#NL
	detection.

ܥ
#NL
	Converts the selected region to a grey image
#NL
	that is highlighted such that the details
#NL
	appear to stand out from the screen.

...
#NL
	Does an effect similar to an oil painting.
#NL
	You are queried for the mask size, which must
#NL
	be an odd integer. Recommended values range
#NL
	from 3 to 15. Higher values result in a more
#NL
	pronounced effect.

Υɲ...
#NL
	Add random noise to the image, giving a 'grainy'
#NL
	appearance. You are queried for the maximum
#NL
	noise value. Recommended values range from 
#NL
	5 to 50. Higher values result in a more
#NL
	pronounced effect.

Spread...
#NL
	This operation swaps each pixel in the region with
#NL
	a random pixel near it, giving an effect similar to
#NL
	frosted glass. You are queried for the maximum
#NL
	distance. Good values range from 1 to 10.
#NL
	You can also specify how many iterations you want
#NL
	performed. This is equivalent to manually selecting
#NL
	the operation that many times.

Pixelize...
#NL
	Makes the image look low resolution. This works by
#NL
	replacing each 'megapixel' with the average color 
#NL
	within that region. You are queried for the megapixel
#NL
	size; this can be specified as square (e.g., '5') or 
#NL
	rectangular (e.g., '2x4').


#NL
	This operation colors each pixel in the region
#NL
	with a weighted average of the center color and
#NL
	the color on the edge that intersects a line drawn
#NL
	from the center to the pixel in question.
#NL
	The result is to 'blend the region out of existence'.

Solarize...
#NL
	Inverts pixels with a value larger than the 
#NL
	specified threshold. This simulates what happens
#NL
	to a photographic film that is exposed to light
#NL
	during development. Works best for greyscale
#NL
	images. You are queried for the threshold (1-99 %).

Normalize Contrast
#NL
	Normalizes the contrast by forcing the lightest pixels
#NL
	to white, the darkest pixels to black, and linearly
#NL
	rescaling the ones in between.
#NL
	You are queried for Black and White levels in %.
#NL
	Pixels darker than the Black level will become black,
#NL
	and pixels brighter than the White level will become
#NL
	white. The pixels in between will be rescaled linearly.
#NL
	'100 %' refers to the brightest pixel in the image.

Quantize Colors...
#NL
	Reduces the number of colors in the image. The
#NL
	algorithm selects the set of colors that gives
#NL
	the best result and then replaces the original
#NL
	colors with the best match in the new color set.
#NL
	You can choose the number of colors to use,
#NL
	from 2 to 256.

Turn into Greyscale
#NL
	Converts all colors in the image to greyscale.

#BEGIN imageMenu  "˥塼"
The image menu provides a set of operations that are applied to
the current image/paint canvas. 


#NL
	Brings up the Fat Bits editor, which allows
#NL
	for editing an enlarged area of the current
#NL
	image without having to enlarge the entire
#NL
	image.

åɽ
#NL
	Turns on and off a visible black grid
#NL
	between the original pixels on images with a
#NL
	scale greater than 1 (i.e., zoomed).  This
#NL
	grid is only for painting purposes.  It does
#NL
	not affect the actual image.

ʥå
#NL
	Turns on/off restriction of the current x
#NL
	and y position for most operations to an
#NL
	invisible grid.

ʥå״ֳ...
#NL
	Sets the distance between points on the
#NL
	invisible snap grid.

طѹ...
#NL
	This operation changes the background color
#NL
	for the current image (default color is
#NL
	white).  This is only used when a region is
#NL
	erased or cut from the current image and
#NL
	when odd-shaped regions are saved. See
#NL
	"Color Wheel" under the "Pattern Editor" for
#NL
	more information on selecting a color.

ѹ...
#NL
	Changes the size of the current canvas by
#NL
	cutting away or adding area on the right and
#NL
	lower sides.  This operation is not
#NL
	reversible (except by 'Revert') and affects
#NL
	the actual image size.

ľ...
#NL
	Changes the number of consecutive changes
#NL
	that can be undone or redone. Note that each
#NL
	undo level uses as much memory as the image
#NL
	itself, so large numbers can use up a lot of
#NL
	memory.

ưȥߥ...
#NL
	Changes the size of the current canvas by
#NL
	cutting away any borders. The border color
#NL
	is defined as the color common to at least
#NL
	two corners. If no two corners have the same
#NL
	color, nothing is done.
#NL
	This operation is not reversible and 
#NL
	affects the actual image size.
#NL

ѹ...
#NL
	Enlarges the working image by the specified
#NL
	scale.  This does not affect the size of the
#NL
	image for saving, etc.
	
#BEGIN patBox   "ѥåΰ"
There are two palette areas found on the painting window to
select the primary and secondary colors or patterns. These two
selections are accessible by many of the painting tools through
use of either mouse button one or button two, respectively.   See the
specific tool for more information.  All filled objects (i.e., boxes,
ovals, and polygons) are always filled in the secondary color/pattern,
with a border of the primary color/pattern.

Colors or patterns may be modified by double-clicking on the icon.
On a colormapped display (i.e., using less than 24-bit colors), changes
to a selected color will change that color in all locations on the
paint canvas as well.  Color selection is done through a color
wheel similar to that used under the "Pattern Editor".  See help on
the "Pattern Editor" for more details as well as for information
on editing patterns.

Colors and patterns are loaded from information merged
from the following files each time a canvas is created:
#NL
	.XPaintrc in the user's home directory
#NL
	.XPaintrc in the current directory

A quick method for adding a new color is found by using the "Lookup"
button.  This button allows the user to select any color available
on the screen and will either locate it in the current palette or
add it.   Once the color is found in the palette, it is selected.

Note:  Color/pattern changes affect both primary and secondary palettes.

All of the patterns and colors can be saved with the "Save Palette..."
item in the file menu.
#PUSH
#BEGIN pattern "ѥԽ"
The pattern editor creates new patterns or modifies existing ones
for use on the painting canvas.

The window contains the current pattern and (depending on display
type) the current colormap and a color selection area.

Patterns are by default 24x24 in size, but may be set to any size
through the "Size" menu.  The other menus available provide
similar functionality to those in the paint window and pattern
editing uses the normal paint operations.

Patterns may be individually saved through the ̾¸ option in
the إե menu or saved with the palette.  See إѥåȤ¸...
under the Paint Window.  When loading an individual pattern, only
the portion of the pattern that fits in the pattern area will be
included.

The "Grab" button allows the user to select a portion of the current
screen to fill the pattern area. 
#PUSH
#BEGIN colormap "Colormap Area"
When using a colormapped display, selecting a colormap entry will
allow the user to change the value of that entry.  This will change
all pixels on the canvas that share this colormap index.

The "Lookup" button allows the user to select any color available on
the screen and will locate the colormap entry for this color value.

Note:  Manipulating colormap entries effects the canvas immediately
and does not revert when "Cancel" is chosen.

#BEGIN colorwheel "Color Wheel"
The XPaint color selection allows access to both the HSV or RGB color
space models.  The color wheel along with the value
slider represents HSV, while the red, green, and blue sliders are for
manipulating the color in an RGB space.  Modifications in either of
these color spaces will effect the other.

Colors can be selected on the color wheel by using the mouse to drag
the selection circle or to click on a desired color.   Changes
to value will determine the brightness of the chosen color.  Colors
can also be modified through the red, green, or blue sliders or by
entering values in the text fields.

""ϲ̾Τ륫顼򤷤, ߤΥ顼ꤷ
 The exact color will be determined using the colormap of the
selected window.
#POP
#POP
#POP
#BEGIN fileformat	""
XPaintϥѥѤǤ饤֥˽¿βбޤη⡢ĤϸưƤСǤϵǽʤ⤷ޤ

ɽ˳ƲδñħXPaintǥݡȤƤ뵡ǽˤĤƤޤȤƤޤ٤Ƥηɤ߹ߡ񤭹ߤξȤ⥵ݡȤƤǤϤʤΤǵդƤ

顼οϤβǥ顼ϿƤӥåȿΰ̣Ǥ줬1ӥåȤβǤϥ顼ο2ͤΤߤ˵ϿƤޤ24ӥåȥ顼Ǥ224ɽ륫顼(16)ϿƤޤ˴طʤ¸եˤϸߤΥǥץ쥤Υ顼ǽȿǤޤ(㤨С졼β̤ɤ߹顼ϥ졼Ȥ¸ޤ)ܺ٤ϡإǡ»βǽ٤ξϤ

Υޥ󥰵ǽǤϡüʷΰ¸ɤ߹ߤǤޤ(㤨Сɬפʤΰ䡢˷ʤ)ܺ٤ϡΰ¸٤ξϤȡإåץܡɤɤ߹...٤ξϤ

ƷˤĤƤξܺ٤ϡξϤκǸ򻲾ȤƤ

						顼			
#NL
		ɤ߹	񤭹	ο			ޥ
#NL
GIF						8ӥå			
#NL
JPEG					24ӥå		
#NL
PNG						8, 24ӥå		
#NL
PPM						24ӥå		
#NL
PS						24ӥå		
#NL
SGI						24ӥå		
#NL
TIFF						8, 24ӥå	
#NL
XBM					1ӥå			
#NL
XPM					8ӥå			
#NL
XWD					24ӥå		

GIF - Graphics Interchange Format
#NL
	PCޤ ץåȥեѤ
#NL
	Ƥͭ̾ʲ

JPEG - Joint Photographic Experts Group
#NL
	ʤ¸ˡɸŪ˻ȤƤ
#NL
	Բĵհ̤ԤʤǤ

PNG - Portable Network Graphics
#NL
	GIFؤȤơTIFFγĥȤƿǥ
#NL
	󤵤줿ǤGIFTIFFͥ줿
#NL
	̥르ꥺäƤꡢ(JPEGȰä)
#NL
	ǡ»ޤ

PPM - Portable PixMap
#NL
	βPBMPlus/NetPBMġ륭åȤѤ
#NL
	ƤޤΥġ륭åȤˤäƤη¾¿
#NL
	ηѴ뤳ȤǽǤ

PS - PostScript
#NL
	ݥȥץȷ̾UNIXѥץ
#NL
	ǻȤƤꡢƥȽΥѥåǤ

SGI - Silicon GraphicsҤη
#NL
	SGIȼβǤSGIҤΥޥΥ饤֥
#NL
	ˤäƥݡȤƤޤη¾
#NL
	ץåȥեǤѤǤޤ

TIFF - Tagged Image File Format
#NL
	礭ʣʲΤηǤXPaintɸ
#NL
	ȤƻȤޤ

XBM - X Window BitMap
#NL
	XɥƥѤƤ2ͤ
#NL
	Ǥ

XPM - X Window PixMap
#NL
	XPMASCIIƥȷ¸ƤꡢCץ
#NL
	ǤΤޤ޼ळ(include)ǽǤ

XWD - X Window Dump
#NL
	Xɥƥβ̥ײȤѤ
#NL
	Ƥޤ

#BEGIN about		"XPaintˤĤ"
:
XPaintΥСTorsten Martinsen (torsten@image.dk)ˤäƥƥʥ󥹤Ƥޤ
PNGեޥåȤΥɤGreg Roelofs (newt@uchicago.edu)ˤäƥƥʥ󥹤Ƥޤ
David Koblas᤬줿XPaint 2.1.1١ȤʤäƤޤ
David KoblasإХݡȤʤɤϷ褷ʤǤ

ʲΥåϥС2.1.1ˤäꥸʥΥåܸǤ

               ----------------------------

ΥեȥʤΤΩƤȻפޤ⤷Х䥳ȤСڤ˻ϢƤƤ

ΥեȥDonate()WareȤƺƤޤXPaintڤǤ餤ǤѤǤɤʾʤȤǤԤشդ˾ȻפäΤʤ顢줬ؤδդȤʤǤ礦

⤷ʤ䤢ʤβҤѥ󥵥ȤθѤ˾ʤ顢˾ܺ٤Ϣߤפޤ

David Koblas (koblas@netcom.com)
#NL
Extra Mile Consulting
#NL
PO Box 1352
#NL
Mountain View, CA 94042-1352 USA

#BEGIN copyright	"Copyright Information"
Copyright (C) 1993, David Koblas

Copyright (C) 1995, 1996, 1997, 1998, Torsten Martinsen
#NL
Copyright (C) 1996, Greg Roelofs
#NL
Copyright (C) 1997, Scott D. Nelson

Permission to use, copy, modify, and to distribute this software and
its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation.  There are no representations about the
suitability of this software for any purpose.  This software is
provided "as is" without express or implied warranty.
