Welcome			Welcome
Welcome_Title		Welcome to Vine Linux X Installer!
Continue		Continue
Instructions		Instructions
Congratulations		Congratulations: You are done
Version			Version
Choose_Method		Choose Method
Choose_Packages		Choose Packages
Package1		Choose packages you wish to install.
Package2		Clicking left-hand + will expand sub-list
Enter_Password		Enter Password
Post_Install		Linux Configuration
Xybin			Setup BootStrap Partition
Password		root Password:
Again			root Again:
Passwd_Title		Set root Password
Set_password		Set password
Network_Config		Network Configuration
Credits			Credits
Congradulations		Congradulations
Options_Menu		Options Menu
Finished		Finished
About_BootX		About BootX
Using_BootX		Using BootX
Install			Install
Installing		Installing
Update_Installer	Update Installer
Updating		Updating
Update_Done		Updating Packages done
Language		Language
Choose_Language		Choose Language
Quit			Quit
Reboot			Reboot
Reset			Reset
NFS_mount_failed	NFS mount failed
Close			Close
Cancel			Cancel
Activate		Save and Activate
Finish			Finish
Done			Done
dated			dated
Setup_Network		Setup Network
Setup_DHCP		Setup DHCP
DHCP_Set1		Network has been configured via DHCP
DHCP_Set2		Input a Domain list (space-separated),
DHCP_Set3		Set the hostname, then Click "Save and Activate" now!
Start_Over		Start Over
Site			Site:
Known_sites		I have found the following known sites:
Try_URL			Try URL
Update_URL		Update URL:
Update			Update
Partition		Partition
Name			Name
Type			Type
Size			Size
Length			Length
Mount_Point		Mount Point
welcome_title		Welcome to the Vine Linux Installer!
MountWindowName		Mount Partitions and Setup Swap
Format			Format
FormatMount		Format and Mount
CDROM			CDROM
NFS			NFS
LocalPartition		Local Partition
LocalMountFailed	Local Mount Failed
CDROM_Mount_Failed	CDROM Mount Failed
NFS_Mount_Failed	NFS Mount Failed
Connection_Failed	Connection to URL Failed
Select_Partitions	Select Partitions
Partition_Drives	Partition Drives
Customize		Customize
Check_Diskspace		Check Diskspace
Total_Size		Total size to install:
No_Linux_Partitions	No Linux Partitions Defined
Help			Help
Miscellaneous		Miscellaneous
Disk_Shortage		Disk Size is too small!

Device_Name		Device Name
IP_Address		IP Address
Gateway			Gateway
Netmask			Netmask
On_Boot			On Boot
Default_Gateway		Default Gateway
Hostname		Hostname
Nameserver		Nameserver
SearchDomain		List of search domains with DHCP
Activate		Save and Activate
Setup_PPP		Setup PPP
Recommend		Recommend
no_root_title		No Root partition!
too_small_title		Root is too small!
Launch_xterm		Launch xterm
Launch_kterm		Launch kterm
Configure_Keys		Configure X modifier keys
Show_output		Run xinstaller with output window

Post_Install_Options    Post Install Options
Set_Timezone            Set Timezone
Set_Date_Time           Set Date & Time
Configure_inetd         Configure inetd
Set_Network_Settings    Set Network Settings
Configure_modem_port    Configure modem port
Configure_runlevels     Configure runlevels
Setup_Users_Groups      Setup Users & Groups
Run_Linuxconf           Run Linuxconf

Packages	packages
Total		for
MBytes		MBytes

DefaultFont	-misc-fixed-medium-r-semicondensed-*-13-*-*-*-c-*-iso8859-8

welcome_text
This is the First X based Graphical installer for Vine Linux/ppc.
It is based on X installer on LinuxPPC 2000 and modified much.
More instructions for installing LinuxPPC can be found
at http://www.linuxppc.org/userguide/

In brief, to install Follow the steps below:

0: First of all, setup the network configuration.
You can skip this step: After finishing installation,
you can configure network with "netcfg" command or others.

1: Choose the install method to use. If you already have
the CD in your machine, the installer will skip this part.

2: Select the Partitions that you want to install from.
You will only be able to format UNIX partitions.
If you don't have any UNIX partitions you will need to
create one now. We recommend you make four
partitions: /home, /boot, Swap, and / (often called root). 

3: Choose the software you want to install. The default
install needs about 1 Gigabytes of disk space.
Then Click Install. You can watch the output of the
progress by pressing Ctrl-Apple-F1
(Press Ctrl-Apple-F3 to come back to X installer).

4: Enter your password

Congratulations! You're done installing!
Hit reboot or quit.
end

Recommend_text
We recommend you make four partitions called:

Name:       Size in Megabytes:         Type:

/           600-1500                   Apple_UNIX_SVR4
/home       100 - rest of drive        Linux
/magicboot  32                         Apple_HFS
swap        64                         Linux

If you have a lot of space for linux, 1.5 GB should be the most
you will need for root, you should put the rest of the free space
on /home. It's probably a good idea to put swap at the end of the 
drive. For PREP machines the /boot partition should have the 
kernel copied onto it. For CHRP machines, it should be a msdos format.
end

No_Linux_Partitions_Text
You do not have any Linux partitions 
defined yet. You will have to 
partition you drives before you 
can install.
end

no_root_warning
You did not select a partition to use as the root drive.
You need to input "/"(without the quotes) as a mount point
for one partition.
end

too_small_warning
The partition you have select to use as root seems to be too small.
If you don't rearrange partitions, instllation process may fail
due to the shortage of the partition space.
Anyway, installation process will continue.
end

Size_Exceeds
Total size of packages you choose seems to exceed your
hard disks' available space.
You may deselect some of the packages to proceed,
or you should re-partition your hard disks to get more
space for Linux.
end

NFS_instructions
Type the machine and path - for example
my.machine.org:/path/to/linuxppc/
in the entry box, then click NFS.
end

NFS_badmount_message
NFS mount: failed or didn't contain the 
right files to install Vine Linux. Please
check the server name and path and try
to mount it again.  You can also mount
the partition yourself into /tmp/install
end

No_Install_Files
does not seem to contain any install files.  If you
know where the files are, you should mount them into
/tmp/install
end

Bad_Site
Is not currently working correctly.
Please try another one.
end

URL_help
Enter a URL below or choose a known site.
For example: http://ftp.linuxppc.org/linuxppc-1999/
This Installer is faster with HTTP than FTP sites.
end

BootX_message
If things went well in the MacOS, you are prompted at
bootup with BootX. From there you can choose Linux or
MacOS. If you choose Linux, You will need to tell the
kernel what partition you installed onto. Once you have
installed Linux, you will have to uncheck the 
"Use ramdisk" checkbox.
end

Credits_Text
This Installer started by
Brian Bresen <bbresen@linuxppc.org>

Special thanks goes out to the Free Software
Foundation for helping start the whole effort,
Linus Torvalds for a great kernel, Gary Thomas,
Paul Mackerras and Cort Dougan for helping get
LinuxPPC started and to all the people on the
dev list that have contributed to making Linux
on the PowerPC. Finally to all the other Free
Software groups who made all the pieces to
the puzzle: Apache,GIMP, GNOME, KDE, X, etc.
end

Request_for_Help
If you know a foreign language please help 
make the installer better and submit
a translation! The files are in /usr/X11R6/lib/xli
and are in a very simple text format. Just email
them to me( jcarr@linuxppc.org. ) I only know english!
end

KPPP_Warning
You can not configure a PPP connection using the
Vine Linux installer at this time, or you do not
have kppp installed. Please install KDE if you
would like to use kppp.
end

Finished_Message
You have finished installing Vine Linux.
You may now continue to configure your system
or simply reboot your machine!

After reboot, you have to configure something
in order to boot linux.
On NewWorld ROM Mac, you have to configure yaboot.
On OldWorld ROM Mac, you have to configure BootX.
end
