en to unknown language translation catalogue (125 entries)

en: Back
target: Anterior

en: Device
target: Dispositivo

en: Error
target: Erro

en: You don't have any Linux partitions. You can't upgrade this system!
target: Nenhuma partição Linux foi encontrada. Ns. You can't upgrade this system!

en: What partition holds the root partition of your installation?
target: Em que partição estn holds the root partition of your installation?

en: The packages you have installed, and any other packages which are needed to satisfy their dependencies, have been selected for installation. Would you like to customize the set of packages that will be upgraded?
target: Os pacotes que vocyou have installed, and any other packages which are needed to satisfy their dependencies, have been selected for installation. Would you like to customize the set of packages that will be upgraded?

en: Yes
target: Sim

en: No
target: N

en: IP address:
target: EndereP address:

en: Netmask:
target: M

en: Default gateway (IP):
target: Roteador Default (IP):

en: Primary nameserver:
target: Servidor DNS Primserver:

en: Network Configuration
target: Configuração da Rede

en: Hostname
target: M

en: Bootdisk
target: Disco de Inicialização

en: A complete log of your installation will be in /tmp/install.log after rebooting your system. You may want to keep this file for later reference.
target: Um log completo de sua instalação estaron will be in /tmp/install.log after rebooting your system. You may want to keep this file for later reference.

en: Complete
target: Instalação Finalizada com Sucesso

en: Skip
target: Ignore

en: Root Password
target: Senha do Root

en: Cancelled
target: Cancelado

en: I can't go to the previous step from here. You will have to try again.
target: N

en: no suggestion
target: sem sugestggestion

en: Finding packages to upgrade...
target: Encontrando pacotes a serem atualizados...

en: Add
target: Adicione

en: Edit
target: Edite

en: Delete
target: Apague

en: Unresolved Dependencies
target: Dependnresolved Dependencies

en: Package
target: Pacote

en: Requirement
target: Requisito

en: Install packages to satisfy dependencies
target: Instalar pacotes, satisfazendo dependndencies

en: Install
target: Instalar

en: Upgrade
target: Atualizar

en: First sector of boot partition
target: Primeiro setor da partição de inicialização

en: Use linear mode (needed for some SCSI drives)
target: Use modo linear (necesseeded for some SCSI drives)

en: Partition type
target: Tipo da Partição

en: Boot label
target: R

en: Select individual packages
target: Selecionar pacotes individuais

en: A few systems will need to pass special options to the kernel at boot time for the system to function properly. If you need to pass boot options to the kernel, enter them now. If you don't need any or aren't sure, leave this blank.
target: Alguns sistemas precisarneed to pass special options to the kernel at boot time for the system to function properly. If you need to pass boot options to the kernel, enter them now. If you don't need any or aren't sure, leave this blank.

en: Where do you want to install the bootloader?
target: Onde deve ser instalado o carregador de boot?

en: Clear
target: Limpar

en: Cancel
target: Cancelar

en: Edit Boot Label
target: Editar Boot Label

en: Some of the packages you have selected to install require packages you have not selected. If you just select Ok all of those required packages will be installed.
target: Alguns dos pacotes selecionados para instalação requerem pacotes que nes you have not selected. If you just select Ok all of those required packages will be installed.

en: Disk Setup
target: Configuração dos Discos

en: Disk Druid is a tool for partitioning and setting up mount points. It is designed to be easier to use than Linux's traditional disk partitioning sofware, fdisk, as well as more powerful. However, there are some cases where fdisk may be preferred.
    
    Which tool would you like to use?
target: Disk Druid ruid is a tool for partitioning and setting up mount points. It is designed to be easier to use than Linux's traditional disk partitioning sofware, fdisk, as well as more powerful. However, there are some cases where fdisk may be preferred.
    
    Which tool would you like to use?

en: Done
target: Pronto

en: Continue
target: Continuar

en: What partitions would you like to format? We strongly suggest formatting all of the system partitions, including /, /usr, and /var. There is no need to format /home or /usr/local if they have already been configured during a previous install.
target: Que partições deseja formatar? Sugerimos fortemente que formate todas as partições de sistema, incluindo /, /usr e /var. N /usr, and /var. There is no need to format /home or /usr/local if they have already been configured during a previous install.

en: Check for bad blocks during format
target: Checar blocos ruins durante formatação

en: Pick a root password. You must type it twice to ensure you know what it is and didn't make a mistake in typing. Remember that the root password is a critical part of system security!
target: Escolha uma senha para o root. Voct type it twice to ensure you know what it is and didn't make a mistake in typing. Remember that the root password is a critical part of system security!

en: Password:
target: Senha:

en: Password (again):
target: Senha (de novo) :

en: The root password must be at least 6 characters long.
target: A senha do root deve ter pelo menos 6 caracteres.

en: Password Mismatch
target: Erro na Digitação da Senha

en: The passwords you entered were different. Please try again.
target: As senhas digitadas su entered were different. Please try again.

en: Bad Mount Point
target: Mount Point InvPoint

en: The %s directory must be on the root filesystem.
target: O direte %s directory must be on the root filesystem.

en: The mount point %s is illegal.
    
    Mount points must begin with a leading /.
target: O mount point %s int %s is illegal.
    
    Mount points must begin with a leading /.

en: The mount point %s is illegal.
    
    Mount points may not end with a /.
target: O mount point %s int %s is illegal.
    
    Mount points may not end with a /.

en: The mount point %s is illegal.
    
    Mount points may only printable characters.
target: O mount point %s int %s is illegal.
    
    Mount points may only printable characters.

en: The mount point %s is illegal.
    
    System partitions must be on Linux Native partitions.
target: O mount point %s int %s is illegal.
    
    System partitions must be on Linux Native partitions.

en: The mount point %s is illegal.
    
    /usr must be on a Linux Native partition or an NFS volume.
target: O mount point %s int %s is illegal.
    
    /usr must be on a Linux Native partition or an NFS volume.

en: Too Many Drives
target: Muitos Discos

en: You have more drives than this program supports. Please use the standard fdisk program to setup your drives and please notify Red Hat Software that you saw this message.
target: Voct.You have more drives than this program supports. Please use the standard fdisk program to setup your drives and please notify Red Hat Software that you saw this message.

en: No Drives Found
target: Nenhum Drive Encontrado

en: An error has occurred - no valid devices were found on which to create new filesystems.  Please check your hardware for the cause of this problem.
target: Um erro ocorreu - nenhum dispositivo vdevices were found on which to create new filesystems.  Please check your hardware for the cause of this problem.

en: The partition table on device %s is corrupted.  To create new partitions it must be initialized, causing the loss of ALL DATA on this drive.
target: A tabela de partições do dispositivo %s estorrupted.  To create new partitions it must be initialized, causing the loss of ALL DATA on this drive.

en: Bad Partition Table
target: Tabela de Partições Invle

en: Initialize
target: Inicialize

en: Skip Drive
target: Ignore Drive

en: Retry
target: Insistir

en: System error %d
target: Erro de sistema %d

en: Fdisk Error
target: Erro no Fdisk

en: Delete Partition
target: Delete Partição

en: Edit Partition
target: Editar Partição

en: Allocation Status:
target: Status da Alocação:

en: Successful
target: Sucesso

en: Failed
target: Falha

en: Failure Reason:
target: Razh:Failure Reason:

en: No Mount Point
target: Nenhum Mount Point

en: You have not selected a mount point for this partition. Are you sure you want to do this?
target: Voch?You have not selected a mount point for this partition. Are you sure you want to do this?

en: Mount Point Error
target: Erro no Mount Point

en: The mount point requested is either an illegal path or is already in use. Please select a valid mount point.
target: O mount point requisitado tem um path ilegal ou jal path or is already in use. Please select a valid mount point.

en: Size Error
target: Erro de Tamanho

en: Swap Size Error
target: Erro de Tamanho de Swap

note: build list of why they all failed
en: Unallocated Partitions
target: Partições nocated Partitions

en: There are currently unallocated partition(s) present in the list of requested partitions. The unallocated partition(s) are shown below, along with the reason they were not allocated.
target: Atualmente existem partições nlocated partition(s) present in the list of requested partitions. The unallocated partition(s) are shown below, along with the reason they were not allocated.

en: Reset Partition Table
target: Resetar Tabela de Partições

en: Reset partition table to original contents?
target: Reseto a tabela de partições para o conteontents?

en: Swap Partition
target: Partição de Swap

en: Current Disk Partitions
target: Partições de Disco Atuais

en: Drive Summaries
target: SumtsDrive Summaries

en: No Root Partition
target: Nenhuma Partição Root

en: You must assign a root (/) partition to a Linux native partition (ext2) for the install to proceed.
target: Voch.You must assign a root (/) partition to a Linux native partition (ext2) for the install to proceed.

en: No Swap Partition
target: Nenhuma Partição de Swap

en: You must assign a swap partition for the install to proceed.
target: Voch.You must assign a swap partition for the install to proceed.

en: There are unallocated partitions left. If you quit now they will not be written to the disk.
    
    Are you sure you want to exit?
target: Ainda existem partições ned partitions left. If you quit now they will not be written to the disk.
    
    Are you sure you want to exit?

en: Save Changes
target: Salvar Alterações

en: Save changes to partition table(s)?
target: As alterações devem ser salvas na(s) tabela(s) de partições?

en: You may only delete NFS mounts.
target: Voca.You may only delete NFS mounts.

en: Other CDROM
target: Outro CDROM

en: CDROM type
target: Tipo de CDROM

en: What type of CDROM do you have?
target: Que tipo de CDROM vocOM do you have?

en: Initializing CDROM...
target: Inicializando CDROM...

en: Which driver should I try?
target: Que driver devo tentar?

en: Kickstart Error
target: Erro no Kickstart

en: Error opening: kickstart file %s: %s
target: Erro na abertura: arquivo kickstart %s: %s

en: Error reading contents of kickstart file %s: %s
target: Erro durante leitura do conteudo do arquivo kickstart %s: %s

en: Error on line %d of kickstart file %s.
target: Erro na linha %d do arquivo kickstart: %s.

en: Hard Drives
target: Discos Rd Drives

en: Select Partition
target: Selecione Partição

en: I could not mount that directory from the server
target: N

en: Installation Method
target: M

en: Cannot find ks.cfg on boot floppy.
target: O ks.cfg nt find ks.cfg on boot floppy.

en: NFS server name:
target: Nome servidor NFS:

en: Please enter the IP configuration for this machine. Each item should be entered as an IP address in dotted-decimal notation (for example, 1.2.3.4).
target: Por favor digite a configuração IP para esta mis machine. Each item should be entered as an IP address in dotted-decimal notation (for example, 1.2.3.4).

en: Configure TCP/IP
target: Configuração TCP/IP

en: Determining host name and domain...
target: Determinando nome da mname and domain...

en: bad argument to kickstart network command %s: %s
target: argumento invment to kickstart network command %s: %s

en: Retrieving
target: Buscando

en: FTP site name:
target: Nome servidor FTP:

en: Use non-anonymous ftp or a proxy server
target: Use ftp nnon-anonymous ftp or a proxy server

en: FTP Setup
target: Configuração FTP

en: If you are using non anonymous ftp, enter the account name and password you wish to use below. If you are using an FTP proxy enter the name of the FTP proxy server to use.
target: Se vocf you are using non anonymous ftp, enter the account name and password you wish to use below. If you are using an FTP proxy enter the name of the FTP proxy server to use.

en: FTP Proxy:
target: Proxy FTP:
