install 6.1 - en to no translation catalogue (420 entries)

en: Next
no: Neste

en: Back
no: Tilbake

en: Show Help
no: Vis hjelp

en: Hide Help
no: Skjul hjelp

en: Finish
no: FullfFinish

en: Online Help
no: Online hjelp

en: Language Selection
no: Valg av sprge Selection

en: What language would you like to use during the installation process?
no: Hvilket spranguage would you like to use during the installation process?

en: /dev/ttyS0 (COM1 under DOS)
no: /dev/ttyS0 (COM1 i DOS)

en: /dev/ttyS1 (COM2 under DOS)
no: /dev/ttyS1 (COM2 i DOS)

en: /dev/ttyS2 (COM3 under DOS)
no: /dev/ttyS2 (COM3 i DOS)

en: /dev/ttyS3 (COM4 under DOS)
no: /dev/ttyS3 (COM4 i DOS)

en: Device
no: Enhet

en: What device is your mouse located on? %s %i
no: Hvilken enhet er musen plassert pcated on? %s %i

en: Which model mouse is attached to this computer?
no: Hvilken mustype brukes ps attached to this computer?

en: Emulate 3 Buttons?
no: Emuler 3 knapper?

en: Mouse Selection
no: Musvalg

en: Keyboard Selection
no: Tastaturvalg

en: Which model keyboard is attached to this computer?
no: Hvilken type tastatur brukes pttached to this computer?

en: Install GNOME Workstation
no: Installer GNOME arbeidsstasjon

en: Install KDE Workstation
no: Installer KDE arbeidsstasjon

en: Install Server System
no: Installstall Server System

en: Install Custom System
no: Installstall Custom System

en: Upgrade Existing Installation
no: Oppgrader eksisterende installasjon

en: Installation Type
no: Installasjonstype

en: What type of system would you like to install?
no: Hvilken type installasjon ould you like to install?

en: Error
no: Feil

en: You don't have any Linux partitions. You can't upgrade this system!
no: Du har ingen Linux-partisjoner. Du kan ikke oppgradere dette systemet!

en: System to Upgrade
no: System som skal oppgraderes

en: What partition holds the root partition of your installation?
no: Hvilken partisjon inneholder rotpartisjonen til din installasjon?

en: Customize Packages to Upgrade
no: Tilpass pakker som skal oppgraderes

en: The packages you have installed, and any other packages which are needed to satisfy their dependencies, have been selected for installation. Would you like to customize the set of packages that will be upgraded?
no: Pakkene du har installert og eventuelle andre pakker som er nwhich are needed to satisfy their dependencies, have been selected for installation. Would you like to customize the set of packages that will be upgraded?

en: Yes
no: Ja

en: No
no: Nei

en: Use bootp/dhcp
no: Bruk bootp/dhcp

en: IP address:
no: IP-adresse:

en: Netmask:
no: Nettmaske:

en: Default gateway (IP):
no: Standard gateway (IP):

en: Primary nameserver:
no: Prim:Primary nameserver:

en: Network Configuration
no: Nettverkskonfigurasjon

en: Invalid information
no: Ugyldig informasjon

en: You must enter valid IP information to continue
no: Du meYou must enter valid IP information to continue

en: Hostname Configuration
no: Konfigurasjon av vertsnavn

en: The hostname is the name of your computer.  If your computer is attached to a network, this may be assigned by your network administrator.
no: Vertsnavnet er navnet pe name of your computer.  If your computer is attached to a network, this may be assigned by your network administrator.

en: Hostname
no: Vertsnavn

en: Bootdisk
no: Oppstartsdiskett

en: X probe results
no: Resultater etter X s

en: Unlisted Card
no: Kort som ikke er listet

en: Video Card Selection
no: Valg av grafikk kort

en: Which video card do you have?
no: Hvilket grafikk-kort har du?

en: X Server Selection
no: Valg av X-tjener

en: Choose a server
no: Velg en tjener

en: Installation to begin
no: Installasjon som skal starte

en: A complete log of your installation will be in /tmp/install.log after rebooting your system. You may want to keep this file for later reference.
no: En komplett logg av installasjonen vil befinne seg i /tmp/install.log etter omstart av systemet. Du vil kanskje beholde denne filen som et referansepunkt til senere.

en: Complete
no: Ferdig

en: Insert a blank floppy in the first floppy drive. All data on this disk will be erased during creation of the boot disk.
no: Sett inn en tom diskett i den fhe first floppy drive. All data on this disk will be erased during creation of the boot disk.

en: Skip
no: Hopp over

en: An error occured while making the boot disk. Please make sure that there is a formatted floppy in the first floppy drive.
no: En feil oppstod under oppretting av oppstartsdisketten. Vennligst forsikre deg om at det std floppy in the first floppy drive.

en: Package Installation
no: Pakkeinstallasjon

en: Name   :
no: Navn   :

en: Size   :
no: Sttn Size   :

en: Summary:
no: Sammendrag:

en:     Packages
no:     Pakker

en:         Time
no:         Tid

en: Completed:
no: Ferdig:

en: Remaining:
no: Gjenstemaining:

en: What time zone are you located in?
no: Hvilken tidssone befinner du deg i?

en: Hardware clock set to GMT?
no: Maskinvareklokken satt til GMT?

en: Time Zone Selection
no: Valg av tidssone

en:   <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen
no:   <Tab>/Alt-Tab> mellom elementer   | <Mellomrom> velger | <F12> neste skjerm

en: Welcome
no: Velkommen

en: Partition
no: Partisjonition

en: Manually Partition
no: Manuell partisjonering

en: Automatic Partition
no: Automatisk partisjon

en: Filesystem Formatting
no: Formatering av filsystem

en: LILO Configuration
no: LILO-konfigurasjon

en: Hostname Setup
no: Oppsett av vertsnavn

en: Network Setup
no: Oppsett av nettverk

en: Mouse Configuration
no: Konfigurasjon av mus

en: Time Zone Setup
no: Oppsett av tidssone

en: Root Password
no: Root-passord

en: User Account Setup
no: Oppsett av brukerkonto

en: Authentication
no: Autentisering

en: Package Groups
no: Pakkegrupper

en: Individual Packages
no: Individuelle pakker

en: Package Dependencies
no: Pakkeavhengigheter

en: X Configuration
no: Konfigurasjon av X

en: Boot Disk
no: Oppstartsdiskett

en: Installation Begins
no: Installasjonen starter

en: Install System
no: Installstall System

en: Installation Complete
no: Installasjon ferdig

en: Examine System
no: Undersxamine System

en: Customize Upgrade
no: Tilpass oppgradering

en: Upgrade System
no: Oppgradgrade System

en: Upgrade Complete
no: Oppgradgrade Complete

en: Video Card
no: Grafikk-kort

en: Video Ram
no: Grafikkminne

en: Monitor
no: Skjerm

en: Account Configuration
no: Konfigurasjon av kontoer

en: Root Password:
no: Passord for root:

en: Confirm:
no: Bekreft:

en: Account Name
no: Kontonavn

en: Password
no: Passord

en: Password (confirm)
no: Passord (bekreft)

en: Full Name
no: Fullt navn

en: Add
no: Legg til

en: Edit
no: Rediger

en: Delete
no: Slett

en: New
no: Ny

en: Authentication Configuration
no: Konfigurasjon av autentisering

en: Enable MD5 passwords
no: Bruk MD5 passord

en: Enable shadow passwords
no: Bruk skyggepassord

en: Enable NIS
no: Bruk NIS

en: Use broadcast to find NIS server
no: Bruk kringkasting til find NIS server

en: NIS Domain:
no: NIS-domene:

en: NIS Server:
no: NIS-tjener:

en: Bootdisk Creation
no: Lag oppstartsdiskett

en: Skip boot disk creation
no: Hopp over oppstartsdiskett

en: About to Install
no: Starter installasjonen

en: Congratulations
no: Gratulerer

en: Exit
no: Avslutt

en: Unresolved Dependencies
no: UlltsUnresolved Dependencies

en: Package
no: Pakke

en: Requirement
no: Avhengighet

en: Install packages to satisfy dependencies
no: Installer pakker for  to satisfy dependencies

en: Upgrade Examine
no: Underspgrade Examine

en: You don't have any Linux partitions.
     You can't upgrade this sytem!
no: Du har ingen Linux-partisjoner.
    Du kan ikke oppgradere dette systemet!

en: Customize packages to be upgraded
no: Velg pakker som skal oppgraderes

en: Select drive to run fdisk on
no: Velg disk det fdisk skal kjisk on

en: Choose partitions to Format
no: Velg partisjoner som skal formateres

en: Check for bad blocks while formatting
no: Sjekk etter dr bad blocks while formatting

en: GNOME Workstation
no: GNOME arbeidsstasjon

en: KDE Workstation
no: KDE arbeidsstasjon

en: Server
no: Tjener

en: Custom
no: Egendefinert

en: Install Type
no: Type installasjon

en: Install
no: Installstall

en: Upgrade
no: Oppgradgrade

en: Use fdisk
no: Bruk fdisk

en: Keyboard Configuration
no: Konfigurasjon av tastatur

en: Model
no: Modell

en: Layout
no: Utforming

en: Test your selection here:
no: Test ditt valg her:

en: What language should be used during the installation process?
no: Hvilket spranguage should be used during the installation process?

en: Lilo Configuration
no: LILO-konfigurasjon

en: Install LILO boot record on:
no: Installstall LILO boot record on:

en: First sector of boot partition
no: F

en: Use linear mode (needed for some SCSI drives)
no: Bruk linelinear mode (needed for some SCSI drives)

en: Kernel parameters
no: Parametere for kjerne

en: Create boot disk
no: Lag oppstartsdiskett

en: Do not install LILO
no: Ikke installer LILO

en: Default
no: Standard

en: Partition type
no: Partisjonstype

en: Boot label
no: Oppstartsetikett

en: Emulate 3 Buttons
no: Emuler 3 knapper

en: Configure using DHCP
no: Konfigurfigure using DHCP

en: Activate on boot
no: Aktiver ved oppstart

en: IP Address
no: IP-adresse

en: Netmask
no: Nettmaske

en: Network
no: Nettverk

en: Broadcast
no: Kringkast

en: Primary DNS
no: PrimSPrimary DNS

en: Secondary DNS
no: Sekundecondary DNS

en: Ternary DNS
no: TertiTernary DNS

en: Individual Package Selection
no: Indiviuelt pakkevalg

en: Up
no: Opp

en: Name:
no: Navn:

en: Package Details
no: Pakke

en: Size:
no: Sttk Size:

en: Select Package For Installation
no: Velg pakke for installasjon

en: Package Group Selection
no: Valg av pakkegruppe

en: Select individual packages
no: Velg individuelle pakker

en: Installing Packages
no: Installerer pakker

en: Size
no: SttteSize

en: Summary
no: Sammendrag

en: Packages
no: Pakker

en: Time
no: Tid

en: Completed
no: Ferdig

en: Remaining
no: Gjenstemaining

en: Confirm Partitioning Selection
no: Bekreft valg av partisjonering

en: Low Memory
no: Lite minne

en: As you don't have much memory in this machine, we need to turn on swap space immediately. To do this we'll have to write your new partition table to the disk immediately. Is that okay?
no: Siden du ikke har mye minne pemory in this machine, we need to turn on swap space immediately. To do this we'll have to write your new partition table to the disk immediately. Is that okay?

en: Automatic Partitioning
no: Automatisk partisjonering

en: %s
    
    If you don't want to do this, you can continue with this install by partitioning manually, or you can go back and perform a fully customized installation.
no: %s
    
    Hvis du ikke on't want to do this, you can continue with this install by partitioning manually, or you can go back and perform a fully customized installation.

en: Remove data
no: Fjern data

en: Manually partition
no: Manuell partisjonering

en: View:
no: Vis:

en: System clock uses UTC
no: Systemklokken bruker UTC

en: Location
no: Arbeidsstasjon

en: UTC Offset
no: Forskyvning fra UTC

en: Horizontal Frequency Range
no: Horisontalt frekvensomrcy Range

en: Vertical Frequency Range
no: Vertikalt frekvensomrcy Range

en: Test failed
no: Testen feilet

en: Customize X Configuration
no: Tilpass konfigurasjon av X

en: Bits per Pixel
no: Biter pr. piksel

en: Test this configuration
no: Test denne konfigurasjonen

en: In most cases your video hardware can be probed to automatically determine the best settings for your display.
no: I de fleste tilfeller kan grafikk-maskinvaren finnes automatisk for y determine the best settings for your display.

en: Autoprobe results:
no: Resultat av autossults:

en: Your monitor could not be autodetected. Please choose it from the list below:
no: Din skjerm kunne ikke finnes av autostected. Please choose it from the list below:

en: Use Graphical Login
no: Bruk grafisk pical Login

en: Skip X Configuration
no: Hopp over konfigurasjon av X

en: A few systems will need to pass special options to the kernel at boot time for the system to function properly. If you need to pass boot options to the kernel, enter them now. If you don't need any or aren't sure, leave this blank.
no: For noen f systems will need to pass special options to the kernel at boot time for the system to function properly. If you need to pass boot options to the kernel, enter them now. If you don't need any or aren't sure, leave this blank.

en: Where do you want to install the bootloader?
no: Hvor vil du installere oppstartslasteren?

en: Clear
no: Slett

en: Cancel
no: Avbryt

en: Edit Boot Label
no: Rediger oppstartsetikett

en: Some of the packages you have selected to install require packages you have not selected. If you just select Ok all of those required packages will be installed.
no: Noen av pakkene du har valgt  have selected to install require packages you have not selected. If you just select Ok all of those required packages will be installed.

en: Disk Setup
no: Diskoppsett

en: Disk Druid is a tool for partitioning and setting up mount points. It is designed to be easier to use than Linux's traditional disk partitioning sofware, fdisk, as well as more powerful. However, there are some cases where fdisk may be preferred.
    
    Which tool would you like to use?
no: Disk Druid er et verktool for partitioning and setting up mount points. It is designed to be easier to use than Linux's traditional disk partitioning sofware, fdisk, as well as more powerful. However, there are some cases where fdisk may be preferred.
    
    Which tool would you like to use?

en: Done
no: Ferdig

en: Continue
no: Fortsett

en: What partitions would you like to format? We strongly suggest formatting all of the system partitions, including /, /usr, and /var. There is no need to format /home or /usr/local if they have already been configured during a previous install.
no: Hvilke partisjoner s would you like to format? We strongly suggest formatting all of the system partitions, including /, /usr, and /var. There is no need to format /home or /usr/local if they have already been configured during a previous install.

en: Check for bad blocks during format
no: Sjekk etter dr bad blocks during format

en: Choose Partitions to Format
no: Velg partisjoner som skal formateres

en: Pick a root password. You must type it twice to ensure you know what it is and didn't make a mistake in typing. Remember that the root password is a critical part of system security!
no: Velg et root-passord. Du m You must type it twice to ensure you know what it is and didn't make a mistake in typing. Remember that the root password is a critical part of system security!

en: Password:
no: Passord:

en: Password (again):
no: Passord (igjen):

en: Password Length
no: Passordlengde

en: The root password must be at least 6 characters long.
no: Root-passordet mssword must be at least 6 characters long.

en: Password Mismatch
no: Passordene er ikke like

en: The passwords you entered were different. Please try again.
no: Passordene du skrev inn var forskjellige. Vennligst forsy again.

en: Edit User
no: Rediger bruker

en: Add User
no: Legg til bruker

en: User ID
no: Bruker-ID:

en: The password must be at least 6 characters long.
no: Passordet mssword must be at least 6 characters long.

en: User Exists
no: Brukeren eksisterer

en: This user id already exists.  Choose another.
no: Denne brukeren eksisterer allerede. Velg en annen.

en: You should use a normal user account for most activities on your system. By not using the root account casually, you'll reduce the chance of disrupting your system's configuration.
no: Du b.You should use a normal user account for most activities on your system. By not using the root account casually, you'll reduce the chance of disrupting your system's configuration.

en: What user account would you like to have on the system? You should have at least one non-root account for normal work, but multi-user systems can have any number of accounts set up.
no: Hvilken brukerkonto nt would you like to have on the system? You should have at least one non-root account for normal work, but multi-user systems can have any number of accounts set up.

en: User name
no: Brukernavn

en: Enter the information for the user.
no: Skriv inn informasjon om brukeren.

en: Change the information for this user.
no: Endre informasjonen om denne brukeren.

en: Use Shadow Passwords
no: Bruk skyggepassord

en: Enable MD5 Passwords
no: Bruk MD5-passord

en: NIS Domain:
no: NIS-domene:

en: NIS Server:
no: NIS-tjener:

en: or use:
no: eller bruk:

en: Request server via broadcast
no: Forespequest server via broadcast

en: Bad Mount Point
no: Ugyldig monteringspunkt

en: The %s directory must be on the root filesystem.
no: Katalogen %s mrectory must be on the root filesystem.

en: The mount point %s is illegal.
    
    Mount points must begin with a leading /.
no: Monteringspunktet %s er ugyldig.
    
    Monteringspunkter mt begin with a leading /.

en: The mount point %s is illegal.
    
    Mount points may not end with a /.
no: Monteringspunktet %s er ugyldig.
    
    Monteringspunkter kan ikke slutte med "/".

en: The mount point %s is illegal.
    
    Mount points may only printable characters.
no: Monteringspunktet %s er ugyldig.
    
    Monteringpunkt kan bare inneholde skrivbare tegn.

en: The mount point %s is illegal.
    
    System partitions must be on Linux Native partitions.
no: Monteringspunktet %s er ugyldig.
    
    Systempartisjoner ms must be on Linux Native partitions.

en: The mount point %s is illegal.
    
    /usr must be on a Linux Native partition or an NFS volume.
no: Monteringspunktet %s er ugyldig.
    
    /usr mr must be on a Linux Native partition or an NFS volume.

en: Too Many Drives
no: For mange disker

en: You have more drives than this program supports. Please use the standard fdisk program to setup your drives and please notify Red Hat Software that you saw this message.
no: Du har flere disker enn dette programmet st supports. Please use the standard fdisk program to setup your drives and please notify Red Hat Software that you saw this message.

en: No Drives Found
no: Ingen stasjoner funnet

en: An error has occurred - no valid devices were found on which to create new filesystems.  Please check your hardware for the cause of this problem.
no: En feil har oppst occurred - no valid devices were found on which to create new filesystems.  Please check your hardware for the cause of this problem.

en: An error occurred reading the partition table for the block device %s.  The error was
no: En feil oppstod under lesing av partisjonstabellen for blokkenhet %s. Feilen var

en: The partition table on device %s is corrupted.  To create new partitions it must be initialized, causing the loss of ALL DATA on this drive.
no: Partisjonstabellen pable on device %s is corrupted.  To create new partitions it must be initialized, causing the loss of ALL DATA on this drive.

en: Bad Partition Table
no: Ugyldig partisjonstabell

en: Initialize
no: Initialisialize

en: Skip Drive
no: Hopp over stasjon

en: Retry
no: PrrpyRetry

en: BSD Disklabel
no: BSD-disketikett

en: A disk with a BSD disklabel has been found. The Red Hat installation only supports BSD Disklabels in read-only mode, so you must use a custom install and fdisk (instead of Disk Druid) for machines with BSD Disklabels.
no: En disk med en BSD-disketikett ble funnet. Red Hat installasjonen station only supports BSD Disklabels in read-only mode, so you must use a custom install and fdisk (instead of Disk Druid) for machines with BSD Disklabels.

en: System error %d
no: Systemfeil %d

en: Fdisk Error
no: Fdisk-feil

en: <Swap Partition>
no: <Swap-partisjon>

en: <RAID Partition>
no: <RAID-partisjon>

en: Delete Partition
no: Slett partisjon

en: Are you sure you want to delete this partition?
no: Er du sikker pure you want to delete this partition?

en: Edit Partition
no: Rediger partisjon

en: Mount Point:
no: Monteringspunkt:

en: Size (Megs):
no: Sttt:Size (Megs):

en: Grow to fill disk?
no: Fyll resterende plass p

en: Allocation Status:
no: Allokeringsstatus:

en: Successful
no: FullfSuccessful

en: Failed
no: Feilet

en: Failure Reason:
no: Feil:Failure Reason:

en: Partition Type:
no: Partisjonstype:

en: Allowable Drives:
no: Tillate stasjoner:

en: No Mount Point
no: Ingen monteringspunkt

en: You have not selected a mount point for this partition. Are you sure you want to do this?
no: Du har ikke valgt et monteringspunkt for denne partisjonen. Er du sikker pyou want to do this?

en: Mount Point Error
no: Feil ved monteringspunkt

en: The mount point requested is either an illegal path or is already in use. Please select a valid mount point.
no: Monteringspunktet som ble forespurt er enten en ugyldig sti eller det er allerede i bruk. Vennligst velg et gyldig monteringspunkt.

en: Size Error
no: Feil ved strror

en: The size requested is illegal. Make sure the size is greater and zero (0), and is specified int decimal (base 10) format.
no: Sttl.The size requested is illegal. Make sure the size is greater and zero (0), and is specified int decimal (base 10) format.

en: Swap Size Error
no: Feil ved stize Error

en: You have created a swap partition which is too large. The maximum size of a swap partition is %ld Megabytes.
no: Du har opprettet en swap-partisjon som er for stor. Maksimal stmaximum size of a swap partition is %ld Megabytes.

en: No RAID Drive Constraint
no: Ingen begrensning pConstraint

en: You have configured a RAID partition without constraining the partition to a single drive.
     Are you sure you want to do this?
no: Du har konfigurert en RAID partisjon uten without constraining the partition to a single drive.
     Are you sure you want to do this?

en: Close
no: Lukk

en: You have configured a RAID partition without constraining the partition to a single drive. Please select one drive to constrain this partition to.
no: Du har konfigurert en RAID-partisjon uten without constraining the partition to a single drive. Please select one drive to constrain this partition to.

note: XXXXX - for now destroy the raid entry since it now contains unallocated partitions!
en: RAID Entry Incomplete
no: RAID-oppf Entry Incomplete

en: The raid device /dev/%s now contains partitions which are unallocated. The raid device /dev/%s will now be decomposed into its component partitions. Please recompose the raid device with allocated partitions.
no: RAID-enheten /dev/%s inneholder ncontains partitions which are unallocated. The raid device /dev/%s will now be decomposed into its component partitions. Please recompose the raid device with allocated partitions.

note: build list of why they all failed
en: Unallocated Partitions
no: Ikke-allokerte partisjoner

en: There are currently unallocated partition(s) present in the list of requested partitions. The unallocated partition(s) are shown below, along with the reason they were not allocated.
no: Det finnes ikke-allokerte partisjoner i listen over forespurte partisjoner. De ikke-allokerte partisjonene vises under, sammen med grunnen til at de ikke ble allokert.

en: <Swap Partition
no: <Swap-partisjon

en: RAID Device: /dev/
no: RAID-enhet: /dev/

en: RAID Type:
no: RAID-type:

en: Partitions For RAID Array:
no: Partisjoner for RAID-disk:

en: You have not selected a mount point. A mount point is required.
no: Du har ikke valgt et monteringspunkt. Dette er pt point is required.

en: The mount point requested is already in use. Please select a valid mount point.
no: Monteringspunktet som ble forespurt er allerede i bruk. Vennligst velg et gyldig monteringspunkt.

en: Booting From RAID Warning
no: Advarsel ved oppstart fra RAID

en: You have made this raid device mount as a booting partition.  Please make sure all the component partitions are bootable.
no: Du har valgt at denne RAID-enheten skal v as a booting partition.  Please make sure all the component partitions are bootable.

en: No RAID Device
no: Ingen RAID-enhet

en: You need to selected a RAID device.
no: Du m.You need to selected a RAID device.

en: Used Raid Device
no: Brukt Raid enhet

en: The raid device "/dev/%s" is already configured as a raid device. Please select another.
no: RAID-enheten "/dev/%s" er allerede konfigurert som en RAID-enhet. Vennligst velg en annen.

en: Not Enough Partitions
no: Ikke nok partisjoner

en: You have not configured enough partitions for the RAID type you have selected.
no: Du har ikke konfigurert mange nok partisjoner for RAID-typen du valgte.

en: Illegal /boot RAID Type
no: Ugyldig RAID-type i /boot

en: Boot partitions (/boot) are only allowed on RAID-1.
no: Oppstartspartisjoner (/boot) kan kun plasseres p RAID-1.

en: The partition %s is a pre-existing partition in the set of partitions for this RAID device.  The mount point is set to /boot. Are you sure that it is possible to boot from this partition?
no: Partisjonen %s er en eksisterende partisjon i settet med partisjoner for denne RAID-enheten. Monteringspunktet er satt til /boot. Er du sikker pthat it is possible to boot from this partition?

en: Use Pre-existing Partition?
no: Bruk eksisterende partisjon?

en: Auto-Partition
no: Auto-partisjoner

en: Using Existing Disk Space
no: Bruk eksisterende diskplass

en: Remove Linux partitions
no: Fjern Linux partisjoner

en: Use existing free space
no: Bruk eksisterende ledig plass

note: workstation or server?
en: Intended Use
no: P

en: Workstation
no: Arbeidsstasjon

en: Delete RAID Device?
no: Slett RAID enhet?

en: Are you sure you want to remove this RAID device?
no: Er du sikker pure you want to remove this RAID device?

en: Reset Partition Table
no: Nullstill partisjonstabellen

en: Reset partition table to original contents?
no: Sett partisjonstabellen tilbake til originalt innhold?

en: <not set>
no: <ikke satt>

en: Unallocated Partitions Exist...
no: Det finnes ikke-allokerte partisjoner...

en: You must assign a root (/) partition to a Linux native partition (ext2) or a RAID partition for the install to proceed.
no: Du m.You must assign a root (/) partition to a Linux native partition (ext2) or a RAID partition for the install to proceed.

en: Partitions
no: Partisjoner

en: _Add...
no: _Legg til

en: _Edit...
no: R_ediger

en: _Delete
no: _Slett

en: _Reset
no: _Nullstill

en: _Make RAID Device
no: _Opprett RAID-enhet

en: Auto Partition
no: Auto-partisjoner

en: Drive Summary
no: Disksammendrag

en: Swap Partition
no: Swap-partisjon

en: Current Disk Partitions
no: N

en: Drive Summaries
no: Disksammendrag

en: No Root Partition
no: Ingen rotpartisjon

en: You must assign a root (/) partition to a Linux native partition (ext2) for the install to proceed.
no: Du m.You must assign a root (/) partition to a Linux native partition (ext2) for the install to proceed.

en: No Swap Partition
no: Ingen swappartisjon

en: You must assign a swap partition for the install to proceed.
no: Du m.You must assign a swap partition for the install to proceed.

en: There are unallocated partitions left. If you quit now they will not be written to the disk.
    
    Are you sure you want to exit?
no: Det finnes ikke-allokerte partisjoner ennt. If you quit now they will not be written to the disk.
    
    Are you sure you want to exit?

en: Save Changes
no: Lagre endringer

en: Save changes to partition table(s)?
no: Lagre endringer til partisjonstabellen(e)?

en: You may only delete NFS mounts.
no: Du kan bare slette NFS-monteringer.

en: Other CDROM
no: Andre CDROM

en: CDROM type
no: CDROM-type

en: What type of CDROM do you have?
no: Hvilken type CDROM har du?

en: Initializing CDROM...
no: Initialiserer CDROM...

en: Miscellaneous
no: Forskjellig

en: This module can take parameters which affects its operation. If you don't know what parameters to supply, just skip this screen by pressing the "OK" button now.
no: Denne modulen kan ta parametere som har innvirkning ps operation. If you don't know what parameters to supply, just skip this screen by pressing the "OK" button now.

en: Module Parameters
no: Parametere for moduler

en: Devices
no: Enheter

en: Insert your driver disk and press "OK" to continue.
no: Sett inn driverdisketten og trykk "OK" for  to continue.

en: Failed to mount floppy disk.
no: Kunne ikke montere disketten.

en: The floppy disk you inserted is not a valid driver disk for this release of Red Hat Linux.
no: Disketten du satte inn er ikke en gyldig driverdiskett for denne utgaven av Red Hat Linux.

en: Which driver should I try?. If the driver you need does not appear in this list, and you have a separate driver disk, please press F2.
no: Hvilken driver skal jeg forsry?. If the driver you need does not appear in this list, and you have a separate driver disk, please press F2.

en: Which driver should I try?
no: Hvilken driver skal jeg forsry?

en: Specify module parameters
no: Spesifiser parametere modul

en: Kickstart Error
no: Kickstart-feil

en: Error opening: kickstart file %s: %s
no: Feil under opening: kickstart file %s: %s

en: Error reading contents of kickstart file %s: %s
no: Feil under lesing av innholdet i kickstart-fil %s: %s

en: Error on line %d of kickstart file %s.
no: Feil prror on line %d of kickstart file %s.

en: Choose a Language
no: Velg et spr a Language

en: Keyboard Type
no: Tastaturtype

en: What type of keyboard do you have?
no: Hvilken type tastatur har du?

en: Local CDROM
no: Lokal CDROM

en: NFS image
no: NFS-bilde

en: Hard drive
no: Harddisk

en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
no:   <Tab>/Alt-Tab> mellom elementer  | <Mellomrom> velger | <F12> neste skjerm

en: What kind of device would you like to add
no: Hvilken enhet  of device would you like to add

en: I have found the following devices in your system:
no: Jeg har funnet fd the following devices in your system:

en: Add Device
no: Legg til enhet

en: I don't have any special device drivers loaded for your system. Would you like to load some now?
no: Har ikke lastet noen spesielle enhetsdrivere for ditt system. Vil du at jeg skal gj to load some now?

en: Loading
no: Laster

en: Loading second stage ramdisk...
no: Laster ramdisk for andre nivmdisk...

en: Error loading ramdisk.
no: Feil under lasting av ramdisk.

en: Hard Drives
no: Harddisker

en: You don't seem to have any hard drives on your system! Would you like to configure additional devices?
no: Det ser ikke ut som om du har noen harddisker pyour system! Would you like to configure additional devices?

en: Select Partition
no: Velg partisjon

en: I could not mount that directory from the server
no: Klarte ikke  not mount that directory from the server

en: Unable to retrieve the second stage ramdisk
no: Kunne ikke finne ramdisk for nivnd stage ramdisk

en: Rescue Method
no: Redningsmetode

en: Installation Method
no: Installasjonsmetode

en: What type of media contains the rescue image?
no: Hvilken type media inneholder redningsbildet?

en: What type of media contains the packages to be installed?
no: Hvilken type media inneholder pakkene som skal installeres?

en: Cannot find ks.cfg on boot floppy.
no: Kan ikke finne ks.cfg p on boot floppy.

en: PC Card
no: PC-kort

en: Initializing PC Card Devices...
no: Initialiserer enheter prd Devices...

en: NFS server name:
no: Navn pFS server name:

en: NFS Setup
no: NFS-oppsett

en: Please enter the IP configuration for this machine. Each item should be entered as an IP address in dotted-decimal notation (for example, 1.2.3.4).
no: V

en: Use dynamic IP configuration (BOOTP/DHCP)
no: Bruk dynamisk konfigurasjon av IP (BOOTP/DHCP)

en: Configure TCP/IP
no: Konfigurfigure TCP/IP

en: Missing Information
no: Manglende informasjon

en: You must enter both a valid IP address and a netmask.
no: Du m.You must enter both a valid IP address and a netmask.

en: Dynamic IP
no: Dynamisk IP

en: Sending request for IP information...
no: Sender foresprequest for IP information...

en: Determining host name and domain...
no: Undersetermining host name and domain...

en: bad argument to kickstart network command %s: %s
no: ugyldig argument til nettverks-kommando for kickstart %s: %s

en: Boot protocol to use
no: Oppstartsprotokoll som skal brukes

en: Network gateway
no: Nettverkets portner (gateway)

en: IP address
no: IP-adresse

en: Nameserver
no: Navnetjener

en: Domain name
no: Domenenavn

en: Network device
no: Nettverksenhet

en:  <Tab>/<Alt-Tab> between elements   |   <Space> selects  |   <F12> next screen
no:   <Tab>/Alt-Tab> mellom elementer   | <Mellomrom> velger | <F12> neste skjerm

en: Network configuration
no: Nettverkskonfigurasjon

en: Would you like to set up networking?
no: Vil du sette opp nettverk?

en: Retrieving
no: Henter

en: FTP site name:
no: Navn pTP site name:

en: Web site name:
no: Navn peb site name:

en: Use non-anonymous ftp or a proxy server
no: Bruk ikke-anonym ftp eller en proxytjener

en: Use proxy server
no: Velg en proxytjener

en: FTP Setup
no: FTP-oppsett

en: HTTP Setup
no: HTTP-oppsett

en: You must enter a server name.
no: Du m.You must enter a server name.

en: You must enter a directory.
no: Du m.You must enter a directory.

en: If you are using non anonymous ftp, enter the account name and password you wish to use below. If you are using an FTP proxy enter the name of the FTP proxy server to use.
no: Hvis du bruker ikke-anonym ftp, skriv inn kontonavnet og passordet du ssword you wish to use below. If you are using an FTP proxy enter the name of the FTP proxy server to use.

en: If you are using a HTTP proxy server enter the name of the HTTP proxy server to use.
no: Hvis du bruker en HTTP-proxytjener, skriv inn navnet til HTTP-proxytjeneren som skal brukes.

en: Account name:
no: Kontonavn:

en: FTP Proxy:
no: FTP-proxy:

en: HTTP Proxy:
no: HTTP-proxy:

en: FTP Proxy Port:
no: FTP-proxy-port:

en: HTTP Proxy Port:
no: HTTP-proxy-port:

en: Loading SCSI driver
no: Laster SCSI-driver...
